Lucent Technologies R4.2 Administration Download

Page: 389 / 745

Common Administration

Reports Administration

UCS 1000 R4.2 Administration 585-313-507

Issue 3 April 2000 350

Time

— Date and time when the command or activity was executed

Source

— Name of the originating software process that executed the

command or activity

— Login ID that executed the command or activity (if

applicable). A common login ID listed is root

Administrative command text

— Full text of the command or

activity executed with all applicable parameters

Disposition

— Full text of the result of the command or activity

(Optional) Press

F 8

(Actions).

The system displays the Actions Menu (

Figure 150 on page 337

(Optional) Select:

The system updates the report and displays the values last saved.

Printing the
Administrative
Commands Log
Report

The print option provides a complete printout of the Administrative
Commands Log Report.

Note:

You cannot print this report if a printer is not configured for use
with the voice system. See

Printer Administration on page 278

> Update

Summary of Contents for R4.2









































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for R4.2

Reviews:

Related manuals for R4.2

Brands by name

Popular brands

Lucent Technologies R4.2, Administration

Search results

Summary of Contents for R4.2

Reviews:

Related manuals for R4.2

Brands by name

Popular brands