363-205-401
RT Turn Up:
Issue 7, March 1997
Page 1 of 4
IXL-001
RT Channel Bank Turn Up
Task Index List
FIND YOUR JOB IN THE LIST BELOW
.
.
.
.
.
THEN GO TO
NOTE:
When establishing a
SLC
Series 5 Carrier System remote terminal
(RT) you must initially accept the RT equipment as directed in the
Acceptance Tab procedures. Then you must Turn Up the RT
frame/cabinet supporting equipment so that power is established
using procedures in the Power Up Tab. After the RT power (rectifiers,
batteries, and ringing) has been established, the channel bank can be
Turned Up for the required Feature Package configuration.
For craft personnel familiar with
SLC
Series 5 Carrier System RT Turn up
procedures, the quick reference cards (Appendix B for option settings and Appendix
C for RT Turn Up) may be used for abbreviated Turn Up procedures.
Acceptance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NTP-002
Turn Up Series 5 RT Blue or White System Equipped for Any
Feature Package Except FP 303 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NTP-003
Add Digroups C and D to Existing RT for Any Feature Package Except 303 NTP-004
Test Digital Line Connections to DDM-2000, DDM-1000, or DDM-Plus
for Preservice RT (Optional). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NTP-005
Turn Up Series 5 RT Blue or White System Equipped for
Feature Package 303 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NTP-006
Add DS1s to an In-Service Feature Package 303 RT . . . . . . . . . . . . . . . . . . NTP-007
Clear FAIL LED Problems on a Unit During Turnup and Conversion. . . . . . . TAP-100
Verify That Correct Complement of Circuit Packs is Available. . . . . . . . . . . . DLP-500
