363-205-401
RT Turn Up:
Issue 7, March 1997
Page 1 of 8
NTP-003
Turn Up Series 5 RT Blue or White System for Any
Feature Package Except FP 303
1
DO ITEMS BELOW IN ORDER LISTED
FOR DETAILS, GO TO
1.
For FP 303, see NTP-006
1.
NOTE:
This procedure covers turning up the blue (lower) and/or
white (upper) system of a dual channel bank assembly. This
procedure is used for
any feature package equipage of the
RT system.
This procedure assumes the following:
• The outside cable pairs are not closed through to the RT so
that the RT is isolated from the digital and derived lines.
• The frame or cabinet housing the RT has been installed.
• The J1C182AB, J1C182AE, or J1C182AF assembly has
been installed in the frame or cabinet enclosure.
• The miscellaneous pair panel, protector connectors, power
shelf, fan shelves, and battery shelves (if required) have
been installed in the frame or cabinet enclosure.
• The Acceptance Tab procedures in this volume have been
performed.
• The cabinet or frame power equipment has been turned up
using Power Up Tab procedures in this volume.
This procedure contains instructions concerning the installation of
the various units into the RT channel bank assembly shelves, and
for verifying that the units are operating properly.
