363-205-401
DT Turn Up:
Issue 7, March 1997
Page 1 of 2
DLP-502
Install EAF1 Drop Test Card on ASJ2 Channel Unit
At Distant Terminal
1.
Turn DT power switch OFF.
2.
On the right side of the ASJ2 channel unit, remove the cover plate by taking
off the nut. Save the nut and discard the cover plate.
3.
On the side of the ASJ2 channel unit (Figure 1), insert the EAF1 drop test
module in the jack by sliding the flaps under the retaining slots, aligning the 20
pin connector, and pressing the EAF1 on to the ASJ2. Use the nut to secure
the EAF1.
4.
Turn DT power switch ON
only if the battery pack is connected.
STOP. YOU HAVE COMPLETED THIS PROCEDURE.
