363-205-401
Acceptance: DLP-505
Issue 7, March 1997
Page 3 of 6
Figure 3 – DT Pedestal Ground Connections — Block Diagram
4.
Open DT and verify that ground cable to 900A2 or 900A3 DT closure is
secured by SLU35 connector (cable clamp) located in bottom of DT closure
and that ground cable is routed and terminated to the ground bus in the pedes-
tal.
Comment:
DT power cord connections, DC power protector installation, and
DC power pair connections can be made on an "as required
basis".
Drop Cables
Drop Pair
Protector Blocks
To DT2
To DT3 if
Equipped
DT1
DT3
Power
Interface
Box
Ground Bus
Pass-through
For Cables
