363-205-401
Conversions: DLP-505
Issue 7, March 1997
Page 1 of 4
Set ZCS LIU Line Coding Option for Feature Package
C-AutoCut or FPB Mode 2 Conversion
1.
FPC-AutoCut requires AUA6( )C or AUA6( )D version LIUs. FPB Mode 2
requires AUA6( )D version LIUs. If the RT is not equipped with C or D version
LIU, you must replace the older version LIUs. When replacing an older ver-
sion, set the new LIU options before removing the older version LIU. Proceed
to Step 3 if converting to Mode 2, otherwise continue with Step 2.
2.
Establish communication with craft personnel at COT. If a multiplexer facility is
used, get appropriate documentation for the type of multiplexer facility used. If
AT&T DDM-1000 multiplexer is used, see AT&T 363-206-100 and use the
set-dsx-code: command to select
AMI line coding at both ends of the system.
3.
Are you replacing an older version LIU with an AUA6( )C/D LIU?
If YES, then continue with Step 4.
If NO, then proceed to Step 8.
4.
Using orange stick (KS-6320, L1) or equivalent, set equalizer switches S2 on
LIU AUA61C or AUA61D (Figure 1) per work order (Table A).
Table A
AUA61( )
LIU Equalizer Settings
Distance
to DSX-1
Equalizer Switch
(S400/S2) Setting
(Feet)
2
1
0
0-132
133-265
266-398
399-532
533-655
OFF
OFF
OFF
ON
ON
OFF
ON
ON
OFF
OFF
ON
OFF
ON
OFF
ON
