14
Stinger OC12-ATM Trunk Module Guide
Configuring the OC12-ATM Trunk Module
Checking OC12-ATM trunk interface status
aps-channel-recv-rdi-count = 0
loss-of-signal = False
loss-of-frame = False
out-of-frame = False
section-state = sonet-section-active-no-defect
path-state = sonet-path-active-no-defect
ais-receive = False
yellow-receive = False
out-of-cell-delineation = False
loss-of-cell-delineation = False
aps-receive = False
rsop-bip-error-count = 46350
rlop-bip-error-count = 52896
rlop-febe-error-count = 0
rpop-bip-error-count = 0
rpop-febe-error-count = 0
racp-chcs-error-count = 0
racp-uchcs-error-count = 0
racp-rx-cell-count = 0
tacp-tx-cell-count = 0
frequency-justification-count = 0
HEC-cell-drop-counter = 0
FIFO-overflow-counter = 0
idle-cell-counter = 0
valid-cell-counter = 0
short-packet-counter = 0
bad-crc-packet-counter = 0
bad-seq-packet-counter = 0
valid-packet-counter = 0
time-elapsed = 743
valid-intervals = 79
performance-monitoring = { 646 664 0 46350 0 0 0 664 0 0 0 0 0 0 0 0 0 0 0 0 }
interval-performance-monitoring = [ { 876 901 0 7323 0 0 0 901 0 0 0 0 0 0 0 0 +
spare-physical-address = { any-shelf any-slot 0 }
sparing-state = sparing-none
sparing-change-reason = unknown
sparing-change-time = 0
sparing-change-counter = 0
Parameter
Indicates
physical-address
Physical location of the OC12-ATM line within the
Stinger system.
