The Built-in Configurator
Set the Serial Parameters
WaveLAN/EC-S User’s Guide
4-25
Set the Serial Parameters
4
The Serial Communication parameters identify the behavior of
your WaveLAN/EC-S device when connected to a computer
terminal or peripheral device via the RS-232 port. To view/modify
these parameters:
1.
Start the built-in configurator as described on the first pages of
this chapter.
2.
From the Main Menu, select the item “Edit configuration” to
open the Edit Menu.
Figure 4-5 Open the Serial Parameters Menu
3.
From the Edit Menu, select the option “RS-232 port (uart0)” to
display the RS-232 Configuration Menu, pictured in Figure 4-6
on page 4-26.
