Installing the WaveLAN Card
Preparation
2-2
WaveLAN/ISA Card User’s Guide
Figure 2-1
2
Hardware Configuration Switches
Setting the I/O Base Address
2
The I/O base address switches are factory preset to
address
0300H
. You need to change this setting only if
another device already installed in your computer is
using this address. Table 2-1 shows which I/O base
addresses are available.
Use a small flat-blade screwdriver to set the switches.
isa-src.bk : isa-ch2.frm Page 2 Monday, October 14, 1996 1:23 PM
