14
EN
remaining battery life is indicated by the indicator light: it is green when
the battery life of the device is sufficient for one session and red when it
is recommended you recharge the device.
F. Turning On/Off
Caution: Before the first use, make sure the device is fully charged to allow
your Luminette® Drive to operate for the entire duration of the session.
To turn on your Luminette® Drive, press and hold the On/Off button
briefly (see figure 1). To change the intensity of the light, simply press
the same button briefly. The change is made cyclically: level 1, level 2,
level 3, then a return to level 1, etc. The Luminette® Drive stays on for
20 minutes, blinks three times when the session is finished and turns
off automatically. To turn off your Luminette® Drive in the middle of a
session, hold down the On-Off button (for 2 seconds).
G. How do you position the Luminette® Drive?
For the maximum efficiency and ideal driving comfort, you must place the
Luminette® Drive correctly in your vehicle.
To properly position your Luminette® Drive:
•
Place the magnetic fixing clip on your sun visor with the elastic band
provided and tighten it firmly.
•
“Clip” the device onto your sun visor using the magnetic clip.
•
Using a tape measure, measure the distance between your face and
the device in order to determine the appropriate light intensity.
