Fish ID+
Make sure press the POWER-MENU key until FISH ID+appears. Select either Off to
view “raw” sonar returns, or On to view Fish symbols. Fish ID+ uses advanced signal
processing to interpret sonar returns, and will display a Fish Symbol when very
selective requirements are met. A select number of possible fish returns will be
displayed with their associated depth. (On, Off)
Contrast
Make sure that the SetUp menu is selected, then press the POWER-MENU key until
CONTRAST appears. Select a setting from 1 through 5. (1 to 5)
Units
Make sure press the POWER-MENU key until UNITS appears. UNITS selects the
units of measure. ( Feet/F, Meters/C, Feet/C, Meters/F ,where F stands for
Fahrenheit and C stands for Celsius )
Battery Alarm
Make sure that the SetUp menu is selected, then press the POWER-MENU key until
BATTERY ALARM appears. Select Off or 8.5 to 13.5 Volts. Battery Alarm sounds
when the input battery voltage is equal to or less than the menu setting. ( Off, 8.5 to
13.5 Volts )
Bottom View
Make sure press the POWER-MENU key until BOTTOM VIEW appears. Bottom View
selects the method used to represent the bottom and structure on the display.
( Structure ID, Black, WhiteLine, Inverse )
Structure ID represents weak returns as light pixels and strong returns as dark
pixels. This has the benefit of ensuring that strong returns will be clearly visible on
FI
SH
I
D+
ON
18
FISH
ID+
ON
FISH
ID+
OFF
CONTRAST
5
5
1
UNI
TS
METERS/
C
BATT
ALARM
OFF
13.
5
OFF
BOTTOM
VI
EW
STRUCTURE
I
D
-5-
