Lucky Prospect Series, Rider'S Manual

PROSPECT & CREW COMPLETE > 

IHC

COVENANT COMPLETE > 

HIC

HOW TO ASSEMBLE YOUR RIDE

1.

Install the Bars:

Loosen the clamp on the Bars. 

“Press” the bar down tube onto the 

fork twisting if necessary. The tube will 

slide nicely onto the IHC shim.

1.

Install the Bars:

Loosen the clamp on the Bars. 

“Press” the bar down tube onto the 

fork twisting if necessary. The tube 

will slide nicely onto the composite 

aluminum HIC shim.

2. Align the wheel: 

Align the front wheel to be straight 

and aligned with the bars, lightly 

tighten the clamp bolts alternating 

between each of them until all are 

tight. If you tighten one bolt too 

much while the others are loose you 

will damage the clamp not allowing 

the clamp to tighten properly and will 

void warranty.

2. Align the wheel: 

Align the front wheel to be straight 

and aligned with the bars, lightly 

tighten the clamp bolts alternating 

between each of them until all are 

tight. If you tighten one bolt too 

much while the others are loose you 

will damage the clamp not allowing 

the clamp to tighten properly and will 

void warranty.

HOW TO ASSEMBLE YOUR RIDE