2
F
8
F
0
0
6
F
6
F
ENT
ENT
ENT
ENT
ENT
ENT
InfiniRange
®
(Measurement Range Extension)
Using InfiniRange while in Measure:
If
or
appear during rotation,
turn shafts back at least 5° until numbers
reappear, then pause.
InfiniRange
then starts
automatically. (
,
, shows...)
When
appears readjust beam to
00
.
When
appears press
.
Proceed with measurement.
Note: Initiate
InfiniRange
manually any time provided
coordinates are displayed, with
.
Using InfiniRange while in Move:
If
or
appear during Move,
move machine back until numbers reappear.
Press
and wait for
InfiniRange
to
start.
When
appears readjust beam to
00
.
When
appears press
.
Continue moving machine.
OPTALIGN
®
PLUS
Quick Reference
Vertical Machines
(see manual)
600
5.0
9.0
10.0
15.0
1.8
3.0
900
3.0
6.0
7.0
10.0
1.2
2.0
1200
2.5
4.0
5.0
8.0
0.9
1.5
1800
2.0
3.0
3.0
5.0
0.6
1.0
3600
1.0
1.5
2.0
3.0
0.3
0.5
7200
0.5
1.0
1.0
2.0
0.2
0.3
TolChek
®
Display
always lit: Value within Excellent tolerances
flashes: Value within Acceptable tolerances
No smiley: Out of tolerance
TolChek
®
Report
O K
= Excellent
A C
= Acceptable
- -
= Out of tolerance
All Speeds: Maximum Soft Foot Reading 2 mils.
Use OEM or in-house tolerances if available.
Tolerances for Shaft Alignment
Offset
(mils)
Excellent Acceptable
RPM
Gap
(mils/10")
Excellent
Acceptable
Spacer Shaft
(mils/inch)
Excellent Acceptable
Targets
Press
until
appears. Press
to confirm coupling diameter (change if
necessary).
Enter coupling targets in inches in the
following order VO, VA, HO and HA. Press
after each entry.
Thermal Growth
Press
(twice) until
appears.
Enter thermal growth values in inches at the
feet. Press
after each entry.
Note: Use the F70 function to enter growth values for
the left machine.
©2001 LUDECA, INC.
Optalign, InfiniRange, Tolchek are registered trademarks of Prueftechnik AG.
Measurement Averaging
Press
.
Select from 2 to 7 and confirm with
.
Storing, Printing and Data Transfer
Saves file
Opens file
Prints a report
Transfers data from the PLUS to
a PC using the Optalign Plus PC
Commander software.
Order No. 01-597-01
Rev.
v
Your local contact —Norm Voelzow
V
oelzow & Company, Inc.
P.O. Box 0158 • Wingate, NC 28174
Phone 704-233-9222 • Fax 704-233-9211
E-Mail: voelzow@perigee.net
LUDECA, Inc.
1425 N.W. 88th Avenue, Miami, FL 33172
Phone: (305) 591-8935 • Fax (305) 591-1537
info@ludeca.com • www.ludeca.com
4
2.
Version 2.0x
