Page 23
© 2011 Luidia, Incorporated
Bluetooth Wireless Settings
The
Bluetooth Settings Dialog Box
can help you set preferences for your Bluetooth-
enabled eBeam receiver. To open this dialog box your Bluetooth receiver must be connected
to your computer with a USB cable and your software must be launched. To open the dialog
box:
Right-click the eBeam Education icon in the
eBeam Education Taskbar menu
Select
Options
On the General Tab select
System Preferences
On the System Tab select
Bluetooth Settings
. The
Bluetooth Settings Dialog Box
will
open.
Bluetooth Settings Dialog Box
The Bluetooth Settings Dialog Box contains the following options:
Friendly
Name
Shows the name for the Bluetooth receiver that is listed on the PC when you search for Bluetooth
devices. The eBeam receiver is shipped with a default Friendly Name.
Change:
Select this button to
change the Friendly Name. You will need to enter a new Friendly name
into the
Change Friendly Name Dialog Box,
and click
OK
. There is an eight character limit on the
Friendly Name. You must select the
Apply New Settings
button to accept any changes.
Security
Allows you to determine who can use the Bluetooth enabled receiver. You must select the
Apply New
Settings
button to accept any changes.The options include:
Allow the eBeam receiver to be "discovered" by Bluetooth enabled devices
:
Lets you set if
the Bluetooth Wireless receiver can be detected by Bluetooth enabled devices. If this box is not
checked, other Bluetooth enabled devices w ill not be able to detect it w ithout knowing the Friendly
Name.
Require Authentication:
Allows you limit access to the Bluetooth Wireless receiver to only those
people who have receiver's PIN number.
Passkey:
Select the
Change
button to change the passkey for your receiver.
Use Encryption
: Ensures that wireless transmissions are secure from unauthorized access.
