5
Immediately report any changes
that occur
(including changes in operating
behavior) to the appropriate
persons/departments! Switch off
the traction device immediately
if necessary and secure.
When working near live
components and cables,
suitable precautions must
be taken to avoid current
transfers or high-voltage
flashovers to the traction
device.
Switch off the traction device
in the event of malfunctions
and secure it. Repair the
fault immediately (or have it
repaired).
Do not make any changes
(additions or conversions)
to the traction device
without obtaining the
approval of LUKAS.
Observe all safety and danger
information on the traction
device and in the operating
instructions.
All safety and danger
information on the traction
device must be complete
and in a legible condition.
Safety devices must never be
disabled!
Only genuine LUKAS
accessories and spare parts
are to be used for repairs.
Before using the traction device,
make sure that nobody is
endangered.
Observe all intervals
for recurring tests and/
or inspections that are
prescribed or stated in the
instruction manual.
Make sure that there is
adequate lighting while working.
Before transporting the
traction device, always
check that the accessories
have been positioned in
such a way that they cannot
cause an accident.
Always keep these operating
instructions within easy reach
at the place of use near the
traction device.
Dispose of all disassembled
parts as well as packaging
materials properly.
