51
e100_le100_manual_173100085_EN
07/2021
WARNING / CAUTION / PLEASE NOTE!
The following may not be cut or spread:
-
live cables
-
prestressed and hardened parts such as springs, spring steels,
steering columns and rollers
- pipes under gas or liquid pressure,
- compound materials (steel/concrete)
- explosive bodies such as airbag cartridges
The operating pressure placed on the rescue device may only be directly changed
after consultation with LUKAS. A change in settings may result in damage to
property and/or injuries.
The StrongArm™ e100/le100 device is
not
explosion-protected!
When using the devices in potentially explosive environment,
the following
must be excluded:
- that the device could trigger an explosion.
- that working with the device could trigger an explosion; e.g. sparks may result
from cutting an object.
The responsibility for explosion prevention or for ruling out work with the device is
with the operator of the device or with the person responsible at the place of use.
When working in areas at risk of explosion, all applicable legal,
national and international regulations, standards and safety rules
for avoiding explosions must be observed without restriction!
The device should not come into contact with acids or alkalies. If this is unavoidable,
clean the equipment immediately afterwards with a suitable cleaning agent.
You can obtain replacement parts for the rescue tools from your authorized LUKAS dealer!
