55
e100_le100_manual_173100085_EN
07/2021
4.2.4 Door opening tips (snap-on tips)
4.3 Hydraulic circuit diagram
Below a simplified hydraulic cylinder representing the tool is depicted.
A = tool B = star grip valve
A
B
cutting / gripping / closing
spreading / opening
or extending the piston
or retracting the piston
2-Finger door
opening tip
3-Finger door opening tip
Push button to release
and automatically lock
the tool tip
4.2.5 Rotatable handle
The handle can be rotated about 360 degrees with four set points every 90 degrees. This
allows for easy change of position of the tool for the best angle attack. To do this, pull the
locking pin upwards while turning the handle to the desired position. Let go of the locking pin
and it will automatically engage the next locking position, thus securing the handle again.
Please note!
Use caution installing
or removing tips. Wear
protective gloves to avoid
injury.
CAUTION!
Use combination and door
opening tips only in pairs.
Never combine a single
combination tip with a single
door opening tip.
