17.10.2008
Page 12
• AMIN 12-125T WH •
INFORMATION
If the pusher has been pressed correctly the abrasive wheel cannot be turned any
longer.
●
Unscrew the abrasive wheel with the supplied face spanner 828832 and replace the abrasive
wheel.
●
Attach the new abrasive wheel and then release the pusher.
4.2
Adjusting the guard
Bring the machine into the following position to adjust the guard:
RIGHT
WRONG
●
Press the pusher at the angle head and hold it down during the entire operation.
INFORMATION
If the pusher has been pressed correctly the abrasive wheel cannot be turned any
longer.
●
Bring the guard into the desired position, release the pusher and turn the guard until it audibly
clicks into place.
