17.10.2008
Page 6
• AMIN 12-125T WH •
●
Abrasive wheels that have been disposed must be destroyed to prevent them from being
reused.
●
If they are provided, use spacers between the abrasive wheel and the chucking flange.
●
Do not do the clamping device up too tightly.
●
Never remove the guards of the machines and ensure that they are in good condition and
applied properly.
●
Only start the machine when there is no contact between the work piece and the abrasive wheel.
●
Avoid mechanical damage to the abrasive wheel due to the application of force or impacts or
heating up.
1.3
Obligations of the owner operator
The owner operator is required to ensure that the people who work with the machine
●
are familiar with the underlying regulations on safety at work and accident prevention and have
been instructed in the handling of the machine,
●
who have read and understood the safety and warning information in these operation
instructions and in all other documentation associated with the machine,
●
are checked at regular intervals regarding safe ways of working.
Have servicing, maintenance and commissioning work done by a trained technician. Any defects
that could affect safety must be dealt with at once.
