13
- AMIN 12-125 WH -
Stand: 02.03.2007
1. Introduction
The AMIN 12-125 WH is a pneumatic power tool reflecting state-of-the-art
technology.
It is driven by a vane air motor using compressed air.
The integral speed controller keeps the rotation at a constant speed.
With this power tool both cutting- and grindig wheels as well as lamella discs can be
used economically.
The vibration and sound values specified in the technical data were measured
according to EN 28662-1 and EN ISO 8662-13 as well as prEN ISO 15744.
Prior to using the power tool you should become familiar with
the operation instructions.
The power tool must not be commissioned before the safety
information for the operator has been read.
2. Technical Data
Type:
angle grinder with lever valve
max. RPM:
12.200 min
-1
- 10%
Service pressure:
0,63 MPa
Nomials hose diameter:
13 mm
Weight:
approx.. 2,6 kg
Dimensions:
ca.
∅
102 x 254 mm
Output:
1,0 KW
Air Consumption:
approx. 1,2 m³/min.
Noise levell:
84,5 dB(A) max.
