User’s Guide ...
15
14
... LUKAS BLACKBOX
If a bad block or error is occurred on the SD
memory card, the sign ‘CHK’ is displayed, and,
the SD memory card recovery is automatically
activated.
( On occurrence this condition, please format
the SD memory card for continuous safe
recordings..)
If a SD Card is absent or impossible to recognize,
a sentence SD_FAIL
Slide to give a warming with a buzzer sound.
When stored driving record information is
imported, the progression is displayed with
increasing value from r00.0 to r99.9.
When an error in the driving record storage is
occurred, the sign ’FErr’ is displayed. (Please
contact Service Center.)
On activating ‘Delete’ of the driving record
information, the sign ‘CLE’ is shown on the
display.
When the power is turned off, the sign ‘SEE
You’ is sliding on the display.
When High Temperature Safety Mode is
configured, the sign ‘SAFE’ is displayed and
Safety Mode is activated.
Long Once
Short 3 Times
3 Times
With 0.5 sec.
interval
7. Segment and Buzzer Signal
LUKAS Black Box SEGMENT LED Messages
The display shown on the initial booting of Black
Box gives the number of the current firmware
version. (The number of the firmware can be
upgraded and varies depending the model.)
On the completion of booting process, the time of
parking/stop is displayed. (May vary depending
on the environment configuration.)
On the completion of booting process, the date
of parking/stop is displayed. (May vary
depending on the environment configuration.)
The speed is displayed during driving.
(May vary depending on the environment
configuration.)
On activation of the sound recording, the right
side DOT blinks.
On the start of the firmware updating, the sign
‘UPdA’ is displayed.
When the weekday alarm feature is activated,
the sign ‘dAY’ is displayed with the buzzer
signal.
When operated in Parking Mode, the status is
notified displaying ‘Par’.
When the operation is changed to Driving Mode,
the status is notified displaying ‘drv’.
If a SD card is absent or impossible to recognize
A sentence Sd_FAIL slide to give a warning with
a Buzzer sound.
5 times after the com-
pletion of initialization.
Once on storing an event.
4 times on the
progression
Twice
Twice
With 0.5 sec.
interval
