6
In the event of malfunctions,
immediately deactivate the
equipment and secure it.
Repair the fault immediately.
Do not carry out any changes
(additions or conversions)
to the equipment without
obtaining the approval of
LUKAS beforehand.
Observe all safety and danger
information on the device and
in the operating instructions.
All safety and danger
information on the device must
always be complete and in a
legible condition.
Any mode of operation which
compromises the safety and/
or stability of the device is
forbidden!
Observe all intervals for
recurring tests and/or
inspections that are prescribed
or stated in the operating
instructions.
Safety devices must never be
disabled!
The maximum permitted
operating pressure noted on
the equipment must not be
exceeded.
Make sure before switching
on/starting up the device and
during its operation that this
will put no one in danger.
Only genuine LUKAS
accessories and spare parts
are to be used for repairs.
Please ensure that, when
working with this equipment or
during transportation of such,
you don’t get caught up in the
looped hoses and trip.
When working close to live
components and cables,
suitable measures must be
taken to avoid current transfers
or high-voltage transfers to the
equipment.
Please note that, when
pressing, tearing or breaking
can cause the material to fall
down, or sudden removal can
cause it to suddenly catapult
off: necessary precautions
need to be taken.
The build-up of static charge
and therefore possible
sparking must be avoided
when handling the device.
Only touch any broken-off parts
with protective gloves, as cut
edges can be very sharp.
