User’s Manual
... 5
4
... Lukas Blackbox
1. Attentive Items in Usage
1.
#
Never leave it in a hot or cold place for a long time.
If it is exposed to direct sunlight in summer or cold weather in winter for a long time, it may cause
a malfunction or disorder. When not using the product, avoid leaving it over its storage temperature
range.
ý
Color of the UV filter frame may change when exposed to directly sunlight for a long time.
2.
#
Neither dismantle this product nor alter its structure arbitrarily. When it is dismantled or altered
arbitrarily, A/S is not available. For the check and maintenance, please contact seller or
manufacturer.
3.
Neither alter nor cut power cable. It may cause damage in the product and the car.
The damage of product and car due to it shall be borne by the user.
4.
Do not touch the power part of the product with a wet hand. And let the water not enter into the
product. As it is not a water-proof product, this may cause its malfunction, fire or electric shock.
When cleaning the product, use a soft dry cloth instead of water, volatile agent or detergent.
5.
Never impose a heavy impact on it and never inject an alien material into it. Excessive impact,
load or injection of alien material can cause its malfunction.
6.
Keep dusts and impurities away from the lens of camera.
And do not place other things near the installed product, for they can be reflected on the
window and seen by the product.
7.
Do not manipulate the product during driving. It may cause a car accident.
8. Attach this product so as not to fall during driving.
Otherwise, it may not work properly or fall to obstruct the safe driving.
9. Use only the power cable and accessories that were certified by our company
We are not responsible for all the product damages and other losses due to the use of
uncertified parts.
10.
The compatibility is not guaranteed for other devices and accessories that were not supplied
by our company. The responsibility of product disorder due to this shall be borne by the user.
11.
#
Do not operate the blackbox for a long time while the motor is not running. The car battery
may be discharged and the motor cannot start on.
12.
#
In case that the product has been attached for a long time or exposed to the vibrant driving
condition, check the position of product and the angle of camera.
13.
#
When the surrounding brightness changes as radically as entering/exiting a tunnel or the
background light is too strong or there is no light around it at night, the quality of recorded
image may be degraded.
14.
#
In the car with an excessive tinting on the windscreen, its recorded image may be unclear or
distorted.
15.
#
In an accident with the impact lower than a certain amount, the event data may not be
recorded.
And at a big accident, the image may not be recorded due to the cut-off of power.
16.
#
Never put out the SD card by force during the recording. Be sure to turn off the power before
taking out the SD card. If the SD card is removed while the power is on, it may damage the
.
17.
#
Never pull out the power cable during the use of product. It may damage the product. Never
18.
#
Format the SD card at least once a week (recommended for 8GB product). As the memory
card of blackbox repeats the saving and deleting, the SD card usually gets a heavy load. The
is about 180 days after purchase. Qrontech has no responsibility for the recording failure due
to the use of expired SD card.
19.
#
For the protection of machine and the stable recording, it has the function to stop the
operation at the high temperature. At purchase, it is set to stop the recording in the hot
environment higher than 70°. (When 'Use of High Temperature Safe Mode' is set in the PC
viewer program environment.)
Summary of Contents for LK-6200 Plus
Page 13: ...Ver 01...
