WARNING / BEWARE!
The location of the struts must be chosen so,
that further work on the vehicle is possible!
WARNING / BEWARE!
Never work in an overtired or intoxicated state!
The LX-STRUT is a stabilisation system which forms a bending stiffness triangle by
tensioning a webbing with a ratchet.
The telescopic rod is used to attach the implement to an object to be stabilised. The
telescopic rod can be adjusted by pulling it out to achieve an angle of attack of 45°-65°.
The articulated foot adapts to the inclination. Working on unsafe surfaces is prohibited.
WARNING / BEWARE!
Do not pull the webbing over hot and sharp-edged areas.
If this is unavoidable, install edge protection at the
the hazard location.
Always replace the edge protector and webbing after use.
Check for damage and replace if necessary.
4. Functional description
Permitted applications
Passenger car in lateral position
Car on its roof
Passenger car on another passenger car
WARNING / BEWARE!
The stabilisation must be constantly monitored!
28
LUKAS Operating Instructions LX-Strut
29
LUKAS Operating Instructions LX-Strut
Summary of Contents for LX-Strut
Page 1: ...LX STRUT Original Betriebsanleitung Stabilisierungsstrebe...
Page 38: ......
