25
e100_le100_manual_173100085_EN
07/2017
9.
Maintenance and service
The device is subject to very high mechanical stresses. A visual inspection must therefore
be carried out after every use and a more in-depth inspection must be carried out every six
months. These inspections enable the early detection of wear and tear, which means that
punctual replacement of these wearing parts prevents breakage. Regularly check the torque
of the pivot bolt. (You will find the torque specification for the pivot bolt in the chapter on
“Technical Data”.)
An annual inspection of the tool is due once a year. This inspection must be performed by
a person with the necessary expertise. This means that the person must possess adequate
specialist knowledge and experience in the fields of electrical engineering and hydraulics, so
that they can objectively assess the condition of the tool.
Every three years a crack test of the blades is also essential. A special crack testing kit is
available for this purpose.
Every 3 years or when there might be doubts regarding the safety or reliability of the unit,
an additional function check is to be carried out (complying with the applicable national
and international regulations for the maintenance intervals of rescue equipment). In the
Federal Republic of Germany, regular safety inspections according to the regulations of the
G
esetzlichen
U
nfall
v
ersicherung (GUV; ‘Legal accident insurance’) are mandatory.
ATTENTION!
Clean off any dirt before checking the equipment!
WARNING / CAUTION / PLEASE NOTE!
To perform maintenance and repairs, personal safety equipment appropriate
for the work is a mandatory requirement.
The maintenance and repair staff must have adequate technical and specialized
knowledge.
LUKAS offers appropriate training courses for this.
9.1 Oil change
Under normal working conditions routine oil changes are not necessary with StrongArm™
tools.
The prerequisite is that:
•
the tools are always properly handled and stowed as per the applicable operating manual
•
the tools are tested on a regular basis as per our instructions on preventive maintenance
•
after 10 years service life an oil change is recommended
Regular tests, oil change and/or repairs must be carried out by repair and maintenance
personnel that is trained and authorized by the manufacturer.
