Luma Recorders
|
Local Interface
Click
Back
to return to the settings menu, or
Live View
to return to
the live page.
Alarm
This option is not available on 4-channel DVR models.
This shows the alarms that are available in your system, as well as
their current status.
Trigger
activates the selected alarm(s).
Trigger
All
to activates all alarms on your system.
You can click
Clear All
to cancel all alarms. This does not affect
their settings; it just ends the test.
Manual Video Quality Diagnostics
This option is only available on DVR models.
This page let you perform a quick diagnostic test on the system’s
cameras.
At the top, select the cameras to test. You can click the checkbox at
the left to select all cameras at once.
Press
Diagnose
at the bottom of the page. After a few seconds to a
minute, the center of the page displays the testing results. Channels
that have no attached cameras show as normal in this test result.
Click
Back
to return to the settings menu, or
Live View
to return to
the live page.
Summary of Contents for LUM-500-DVR-16CH
