Luma Recorders
|
Local Interface
Video Quality Diagnostics
to enable your system to test the selected
camera and send a warning of some sort if it fails.
Click on the
Handing
starburst icon to open the settings window
and set up a schedule and an alert linkage method.
The Diagnostics Mode section (to the right of the screen) lets you set
thresholds. For each setting, click on the checkbox to include it in
testing. Then click the up and down arrows to change the settings by
one, click and hold the arrows to scroll the values, or drag the slider
to set the value.
}
Blurred Image
}
Abnormal Brightness
}
Color Cast
At the bottom, click
Restore
to return the camera to its defaults.
Copy
duplicates the camera’s diagnostic settings to other cameras.
Click
Apply
to save the changes you have made.
Click
Back
to return to the settings menu, or
Live View
to return to
the live page.
Video Quality Diagnostics Handling Window
The arming schedule tab lets you determine when video loss
detection is active. To adjust the schedule, choose the day of the
week and click any of the time segments and enter new start and
stop times (shown in 24-hour format). All times included in the
schedule are when video loss detection is active. During time spans
not covered, video loss will not cause an alarm. Click
Apply
to save
the changes you have made. You can also click
Copy
to copy the
schedule to other days of the week (numbered 1–7, with Monday
numbered 1).
The linkage action tab lets you choose what the additional actions or
alerts recorder performs when the camera detects a video loss. Click
Apply
to save the changes you have made.
VCA
This option is only available on NVR models.
VCA allows your NVR to record smart motion events set up within
your IP camera. At the top, select the camera and check
Enable VCA
Alarm
to allow your system to use VCA.
Summary of Contents for LUM-500-DVR-16CH
