Luma Recorders
|
Local Interface
Enable HDMI/VGA Simultaneous Output
(NVR only)
lets you pipe
the video to two different displays; each screen can view different
events.
CVBS Output Brightness
(DVR only)
adjusts the apparent brightness
of the CVBS video stream.
Menu Output Mode
determines which display (of several) is used
for navigation and control. The mouse will not be visible on the
displays that are not selected to be the control display.
Main CVBS Scaling
(DVR only)
adjusts the video output to match
the CVBS display.
Click
Apply
to save the changes you have made.
Click
Back
to return to the settings menu, or
Live View
to return to
the live page.
Network
This section helps set up Internet connectivity for your system.
General Tab
This page sets up the basic networks systems.
NIC Type:
If you are connecting this recorder to an older, slower
network, you can customize the interface to minimize the
bandwidth use if needed. We recommend leaving this set to Auto,
which identifies your system and adjusts operation automatically.
Enable DHCP:
Clicking this enables your network to assign IP
addresses as needed to link with other IP devices. While DHCP is
active, most of the rest of the boxes on this page are deactivated, as
they are subject to be changed by the system as needed. Once the
recorder is linked, deselect this box to ensure the recorder has an
unchanging IP address. This allows you to use the web interface and
mobile utility to access your system.
}
IPv4 Address:
This is the IP address of your recorder, which is
needed to allow you to access the system remotely, and to use
the Luma mobile application. If you will be accessing your
system remotely, be sure to deselect DHCP. You cannot use the
Internet to access your system if DHCP is enabled.
}
IPv4 Subnet Mask:
If you need to edit this to connect to your
network, contact your IT administrator.
Summary of Contents for LUM-500-DVR-16CH
