Luma Recorders
|
FAQ
Jump to Main TOC
35
Jump to FAQ
in the local interface, under
Settings > Configuration >
General
.
}
Check that the camera is using ONVIF profile S. This can be
found in your camera’s documentation.
Can I make an analog camera work with an NVR?
Yes, you can. You’ll need to buy an encoder like the
. This converts the analog signal to a digital one that your NVR
can recognize.
Can I make a digital camera work with a DVR?
Sorry, but no.
Can I get rid of the “No Video” message?
Yes, you can, using the local interface. Click on the
Settings
icon
and go to
Configuration > Live View
.
To the right is a diagram that represents the grid mode from the live
page. You can change the grid mode that you are customizing by
using the buttons below the display to the left.
Within each square of the grid, on the left, is the camera number.
To the right of the channel number is a yellow-and-white deletion
box. To remove an absentee camera from a given grid box, click the
deletion box. The camera number assigned to that box changes to an
X. Since the recorder no longer expects a signal for that channel, it
will no longer display a warning.
See “View Tab” on page 188 for additional details.
Can I rearrange the cameras in grid view?
You can rearrange your cameras using the local interface (only).
Go to
Settings > Configuration > Live View > View
. There you
can assign and unassign cameras and channels to get the views the
way you want. For example, if you have six cameras, you can have
cameras 1, 3, and 6 show up on the first 2x2 grid view, and cameras
2, 4, and 5 show up on the second page.
Summary of Contents for LUM-500-DVR-16CH
