Luma Recorders
|
Local Interface
triggered and the recorder is set to switch to full screen on an
event, this setting shows how long it remains in full screen
mode.
}
Sharpness
(NVR only)
:
Increasing the sharpness makes the
image look less natural, but more distinct.
Click
Apply
to save the changes you have made.
Click
Back
to return to the settings menu, or
Live View
to return to
the live page.
View Tab
By default, your recorder displays your channels in numerical order.
If you want to rearrange where the cameras appear in the live view
grid without reconnecting everything, you can use this screen. For
example, with a recorder that has six cameras, you could split the
channels so that one 2x2 grid shows the three channels on one side
of the building, and the next page of the grid shows the three on the
other side, regardless of how those cameras are physically wired to
the recorder.
At the top, Video Output Interface selects the resolution of grid
mode on the local screen.
Down the left, the system lists your camera numbers and names.
The small icon to the left shows yellow if that camera has been
assigned to a grid channel, and white if it has not.
To the right is a diagram that represents the grid mode from the live
page. You can change the grid mode that you are customizing by
using the buttons below the display to the left.
Within each square of the grid, on the left, is the camera number
(if a camera is assigned to transmit to that grid channel) or an X (if
no camera is assigned). To the right of the channel number or X is
a yellow-and-white deletion box. To remove a camera from a given
grid box, click the deletion box.
To add a camera to a grid box, click on that box so it shows a gold
color, then double-click the camera name in the list to the left. Note
that each camera can be assigned to only one channel, and each
channel can have only one camera assigned to it.
Below the grid are several tools to simplify your work.
To the left are buttons to select which live view page you are editing.
To the right, the button labeled
Start live view of all channels
Summary of Contents for LUM-500-DVR-16CH
