4
Luma 300 Series Wi-Fi Cube IP Camera
Installation
Before you start, ensure that the device is in good condition and all the assembly parts are included.
Also ensure
that your recorder (if you are using one) has the very latest firmware.
Use OvrC to update the firmware, or
consult your NVR manual.
}
Ensure the mounting surface is strong enough to hold three times the weight of the camera and the mount.
}
If the mounting surface is cement, use the included expansion screws to install the camera. If mounting to
a wood surface, use self-tapping wood screws (not included) to secure the camera.
}
If the product does not function properly, please contact technical support. Do not disassemble the camera
for repair or maintenance.
Box Contents
}
Camera
}
Stand
}
Self-adhesive mounting template
}
Power supply
}
3 x camera mount screws with anchors
(1 set is a spare)
®
Important!
Before attaching this to
your Luma NVR,
update
the recorder to the latest
firmware!
If you don
’t,
essential features of your
camera
may not function
.
