11
Say Goodbye to Ugly Products
S
TEP
6:
C
ONNECTING THE
P
OWER
S
UPPLY
(U
PPER
B
ACK
P
ANEL
)
a.
Refer to diagram 7.
Remove the upper back panel from the top of the stand
pole by unscrewing the 4 M5 screws holding it in place.
b.
Insert plug A into socket A and make sure the connection is secure.
c.
Insert plug B into socket B and make sure the connection is secure.
d.
Push all of the wires back into the stand pole and reattach the upper back
panel onto the stand pole using the 4 M5 screws removed in step a.
