10
Luma 600 Camera Manual
AGC
Use the arrows to set the automatic gain control value from 0 (making the image darker in bright areas) to 15
(making the image brighter in dim areas).
Sens-Up
This grants your camera the ability to generate a color image at night by using ambient light. If the shutter is set to
auto or 1/25, you can enable sens-up. When sens-up is enabled, the camera slows shutter time in low-light areas,
allowing more light into the lens. This provides color data, but may result in blurry images of moving objects. If
enabled, you can press
Iris+
to specify sens-up settings.
Sens-Up:
Set the sens-up ratio
anywhere from x2 to x30.
Return:
Press
Iris+
to go back to the previous menu.
Brightness
Use the arrows to control the overall brightness of the image. Low values result in a darker image; high values give
a brighter image. Extreme values can result in loss of detail in dark or brightly lit areas.
D-WDR
Use the arrows to enable or disable digital wide dynamic range. This sets the difference between dark and light
areas to maintain a higher quality image across all lighting conditions. We recommend you keep this off unless
the camera is viewing an area that contains both very bright and dark areas (such as backlit windows).
Defog
Enable the defog function if desired. This grants the camera better visibility in foggy ambient conditions. It does
not affect condensation on the interior or exterior of the camera. Press
Iris+
to set the parameters below.
