Part VI: Troubleshooting and Parts List
14
Operator Lever
Snapping out of gear or
not staying in gear.
Ø
Lever not all the way forward when rack comes under full load.
Push lever quicker and more forcefully into the full forward
position.
Ø
Ram has been overloaded at lower part of face. Check gear for
straightness.
Machine does not seem
to have full chipping
power.
Ø
The belts may be too loose and slipping. Adjust or replace belts as
needed.
Operator Lever not
engaging rack with
pinion gear.
Ø
Clean wood chips or other debris from under rack.
Ø
Clean accumulated dirt from frame where carriage assembly rests
against rubber bumpers.
