Lumag RP-110HP, Instruction Manual

13

TRANSPORTATION

5.   TRANSPORTATION

Before transportation or storage of the equipment, first let it cool down to avoid fire and to 

eliminate fire hazards.

Further, ensure that no one can get hurt by the machine tipping or sliding, nor any loose parts 

can hurt someone or cause hazards.

•  

At transportation, first stop the motor and let it cool down.

•  

Close the fuel tap (8), that is, put it to “OFF” and position the equipment in horizontal to  

avoid leakage of fuel. 

•  

For longer transports, the tank (9) must be emptied. 

•  

Only get use of lifting devices with a capacity of at least 120 kg. 

•  

Check out that the equipment is firmly secured on the transportation vehicle so it can´t roll,  

slide or tip. Do extra securing in the lifting bar.

At loading and transportation with the help of lifting devices, suitable accessories like chains, 

wires, belts shall be attached on intended places. Loading ramps must have the required 

bearing strength and be safely attached.

5.1  To lift the equipment 

•  

Before lifting the equipment, check out that the lifting device is approved for the actual load  

(see technical specifications). 

•  

Locate the lifting hooks in the lifting bar (I) and lift slowly and carefully to avoid accidents  

and damages. 

• 

NEVER

 pass under hanging load!

5.2   Transportation on the ground

•  The transportation accessory facilitates the handling. Tilt forward (push the steering shackle 

forwards). With the help of another person the transportation accessory can now be hooked 

to the base plate. 

PLEASE NOTE:

 only use the transportation accessory on flat and firm surfaces and for 

shorter distances.

5.3  Storage

For storing the equipment for a month or longer periods:

Remove all dirt and stones from the base plate (D)

Clean the air filter (2) or – at heavy dirt or damages – replace it.

Clean flanges on the cylinder top.

Replace the motor oil.

Cover the equipment and store on a dry and clean place.

•

•

•

•

•

WARNING

WARNING

NOTICE

NOTICE

GB

RP-110HP_manual_GB.indd   13

04.02.2010   09:22:53