3
VENTUS 2.0 Manual / Updated 2013/2/15
/ Operational Manual
VENTUS 2.0
3
For your protection, please read these safety
instructions completely before operating the
equipment and keep this manual for future reference.
The information in this summary is intended for
operators. Carefully observe all warnings, precautions
and instructions both on the apparatus and in the
operating instructions.
Equipment Markings
The lighting flash symbol within an equilateral triangle
is intended to alert the user to the presence of un
insulated “dangerous voltages” within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electrical shock. The exclamation
mark within an equilateral triangle is intended to alert
the user to the presence of important operating and
maintenance (servicing) instructions within literature
accompanying the equipment.
Warnings
Water and Moisture :
Do not operate the equipment under or near water - for
example near a bathtub, kitchen sink, or laundry tub, in
a wet basement, near a swimming poor or in areas with
high humidity. Cleaning - Unplug the apparatus from
the wall outlet before cleaning or polishing. Do not use
liquid cleaners or aerosol cleaners. Use a lint-free cloth
lightly moistened with water for cleaning the exterior
of the apparatus.
Ventilation :
Do not block any of the ventilation openings of the
apparatus. Install in accordance with the installation
instructions. Never cover the slots and openings with a
cloth or other material. Never install the apparatus near
heat sources such as radiator, heat registers, stoves, or
other apparatus (including amplifiers) that produce
heat.Grounding or Polarization - Do not defeat the
safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider
OPERATOR SAFETY SUMMARY
than the other. A grounding type plus has two blades
and a third grounding prong.
The wide blade or third prong is provided for your
safety. If the provided plug does not fit into your outlet,
consult an electrician. Power-Cord Protection - Route
the power cord so as to avoid it being walked on or
pinched by items placed upon or against it, paying
particular attention to the plugs, receptacles, at the
point where the cord exits form the apparatus.
Attachments :
Only use attachments as recommended by the
manufacture.
Accessories :
Use only with a cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury
from tip-over.
Lighting :
Unplug this apparatus during lightning storms or when
unused for long periods of time.
ISDN cables :
CAUTION - to reduce the risk of fire, use only No. 26
AWG or larger telecommunication line cord.
Servicing :
Do not attempt to service the apparatus yourself
as opening or removing covers may expose you to
dangerous voltages or other hazards, and will void
the warranty. Refer all servicing to qualified service
personnel.
Damaged Equipment :
Unplug the apparatus from the outlet and refer
servicing to qualified personnel under the following
conditions - When the power cord or plug is damaged
or frayed If liquid has been spilled or objects have fallen
into the apparatus If the apparatus has been exposed