59
VENTUS 2.0 Manual / Updated 2013/2/15
/ Operational Manual
VENTUS 2.0
If User set to BPSK, then see the Red
BAR on time-slot, that means, try to
shows “Error Alarm “ ,Cause by user’s
current setting,
bring up Output Bitrates bigger
then Source bitrates. And need to
re-configuration again. 16 QAM.
And please re-scan, then enable to
decode again.
One channel stream file open button, select Open, then again, you receive the
following pop-up menu.
--> When adding Channel: (Yes), When reset the Chennel: (NO)
In 3.1.0 Version, if the CLCH’s channel information and the actual multi mfs. stream does not match with service number,
then the pop up window will show as below.
* How to bitrates Setting example case with Alarm functioning.