65
VENTUS 2.0 Manual / Updated 2013/2/15
/ Operational Manual
VENTUS 2.0
Ability, Just exact simulate condition like ATSC Mobile DTV on US. Air
Through editing Ensemble configuration with editing Parade configuration and choosing Parades,User enable to
generate a Signal form without any limitation for broadcasting in ATSC-Mobile DTV standards specification
GUI Procedure -Setting Ensembles -> Setting Parades -> Selecting output Parades -> Starting RF output
Support Input file
Single service stream (IP Packet based) - Service Mode
Multiplexed ensemble stream (IP Packet based) - Ensemble mode
Support Editing
Editing of the service ID, service Name, destination IP address from each service is supported.
In service mode, the settings in the codec information (as component descriptor) is required. (ATSC A/153 Part3.
7.8.1 Reference)
- Editing support in SMT-> Service-> Component-> Component descriptor as in the Hex Code.
- A Method to transform SDP to Component descriptor can be found in ATSC A/153 Part7. Annex A.
* Note
ATSC Main TS stream (for multiplexing with M/H TS) and Multiplexed TS stream(Main & M/H) can be used by
T-Pump GUI`s “File Open” button.
Concept of M/H Multiplexer in VENTUS 1.0
Ensemble GUI in T-Pump GUI
Ensemble GUI - Feature
