3. When parameter settings has been completed, Click # 4 from Menu to select transmitting
stream.
It is available to open Specifies the stream from the built-in SSD hard disk or external USB
disk. Select your stream by using the ENTER button.
4. Once you select a stream by using ESC button to go to the previous menu, the frequency
and level setting. First, the frequency settings are as follows.
After clicking the #1 from menu, the Frequency menu will display. Set the desired frequency
using the cursor keys.
Use up and down cursor keys to change the frequency, left and right cursor keys to move the
unit.
Once set up the frequency, go to the previous menu by clicking ESC button
5. Once set up specify the frequency for power transmission from the Settings menu, select
# 2 from Menu.
-> Set desired transmission power level by using the cursor keys
- Use Up/Down Cursor Key to Change the Level, and use Left/ Right Cursor Key to
