IMPAC pyrometer IGA 15 plus
12
6.12
Time
The pyrometer is equipped with an integrated clock. Time and date are only used in combination
with the stored values and can only be read out via interface and software
PortaWin
. On the PC
they are shown additionally to the measured temperatures (see
8.2 software PortaWin
).
The clock has its own power supply and is running even if the pyrometer battery is taken out.
Time setting: - pyrometer must be switched off
- press laser targeting light key and parameter key at the same time
- keep them hold and press the push button to switch the instrument on.
- time appears on the display
- the blinking part, hours or minutes can be set with the arrow keys
- switch from minutes to hours and back with the parameter key
- switch back to the measuring mode by pushing the trigger switch
The date can only be changed by PC via software
PortaWin
, not on the instrument.
7
Interface
The pyrometer is equipped with a serial USB inter-
face.
Via serial interface the pyrometer can be connected
to a PC. This allows to read out the stored data and
analyze them graphically or in table form. Also the
instrument can be used in continuous mode in com-
bination with a PC and the data are displayed on the
monitor as an online diagram (for connecting cables
and software see
Reference numbers accesso-
ries
).
7.1
USB cable
To connect the IGA 15
plus
with a PC, a standard
cable USB-A to mini-USB (5-pole) is necessary
(reference numbers see
,
Reference numbers
accessories
).
8
Accessories
8.1
Battery charger
The series 15 pyrometers are equipped with a charging connector.
This can be used for charging the battery if a rechargeable battery
is inserted. With a charging current of 10 mA a standard 200 mA
rechargeable battery can be charged over night if the symbol for
low battery (
) is flashing up.
connector socket
mini-USB
Charging
connector
