background image

IMPAC pyrometer IGA 15 plus

 

 

 

 

13 

8.2 

Software PortaWin 

PortaWin

 is a Windows based software which enlarges the functions of the pyrometer, the min. 

requirement is Windows XP. To install the software, double-click the setup.exe file on the installa-
tion CD.  
Starting the program will show the following icons with the corresponding functions: 
 

 

Transfers the stored measured values of the pyrometer to the PC. following 
data will be added to each temperature value: 

 

date of measurement 

 

time of measurement 

 adjusted 

emissivity 

 

minimum and maximum value of all measurements 

 

  

 

Starts and stops the recording of temperature data and displays them in an 
online diagram. The sequence of the recorded values is dependent on the 
adjusted time interval.  

 

  

 

Transferred stored data or online recorded data can be stored under a 
certain file name and recalled at any time. 
 

 

  

 

Recalled data can be displayed in a diagram or in table form and printed out 
for further analysis.  
 

 

 

The data files can be converted into text files (under 

output ASCII file

 save 

as .txt file), and transferred into EXCEL. 

 

 

Additionally to the measured values the date and time will be read out via 
interface. Theses values can checked and adjusted on this position.   
 

 

 
 

9

 

Special displays of the pyrometer 

 

Display Description 

 

 

Battery capacity low, only short operation time of the pyrometer,  
automatically shut-down on too low capacity  

7777 

Measuring temperature below beginning of temperature range (250°C) 

8888 

Measuring temperature above end of temperature range (1800°C) 

ERR2 

Malfunction by strong HF-interferences 

MAX 7777 

Maximum value storage below beginning of temperature range (250°C) 

MAX 8888 

Maximum value storage above end of temperature range (1800°C) 

MIN 7777 

Minimum value storage below beginning of temperature range (250°C) 

MIN 8888 

Minimum value storage above end of temperature range (1800°C) 

DIF 7777 

Difference temp. measurement out of display range 

DIF 8888 

Difference temp. measurement out of display range 

 
 
 
 
 

Summary of Contents for IGA 15 plus















Reviews: