background image

IMPAC pyrometer IGA 15 plus

 

 

 

 

Legend 

 

Note: 

The note symbol indicates tips and useful information in this manual.  

All notes should be read with regard to an effective operation of the instrument. 

 

 

 

Security note laser beam: 

Indicates to the danger of a built-in laser targeting light.

 

 

Terminology 

The used terminology corresponds to the VDI- / VDE-directives 3511, page 4. 
 

Disposal / decommissioning 

Inoperable IMPAC pyrometers have to be disposed corresponding to the local regulations of 
electro or electronic material.  
 
 

1

 

Technical data 

 

Temperature range: 

250 to 1800°C (482 to 3272°F) 

Spectral range: 

1.45 to 1.8 µm 

Detector: 

InGaAs detector 

Accuracy: 

0.6% of reading 

(T

amb

 = 23°C, EMI = 100%)

 

Repeatability: 

0.2% of reading 

Temperature coefficient:  0.01% of reading in °C per °C deviation of ambient temp. of 23°C 
Exposure time t

90

20 ms (with dynamical adaptation at low signal levels) 

Emissivity: 

10 to 100%, adjustable in 1% steps 

Temperature display: 

3 values / s 

large display: 4 digit, height 9 mm  
small display: 4 digit, height 4.5 mm 

Temperature resolution:  on display: 

0.1°C: 250 to 999.9°C;  1°C: 1000 to 1800°C 
0.1°F: 482 to  999.9°F,  1°F: 1000 to 3272°F 

via interface:  0.1°C or 0,1°F 

Temp. below 250°C: 

on display:  7777 

Temp exceeds 1800°C:  on display: 8888 
Display illumination: 

automatically at a certain darkness 

Measuring unit: 

°C / °F, switchable 

Measuring functions: 

Normal, MAX, MIN, AVG, DIF 

Alarm functions: 

Hi-alarm (adjustable) 

Sighting: 

Laser targeting light (class II, max. laser power 
level < 1 mW, 

λ

 = 650 nm) 

 

Data storage: 

750 values;  storage of: temperature value, date, time, parameter, 

emissivity, address, interval, temperature unit in °C or °F 

Storage interval: 

PRT; OFF; 0.02 s; 0.04 s; 0.1 s; 0.2 s; 0.5 s; 1 s; 2 s; 5 s; 10 s; 20 s; 50s 

Serial interface: 

USB 2.0 

Power supply: 

9 V battery (IEC 6LR61) or  
9 V-NiMH rechargeable battery (e.g. Varta type 5622) 

Battery operation time: 

50 hours with 9 V battery (without laser and display illumination)  
15 hours with 9 V rechargeable battery (without laser and display 
illumination) 

Charging connector: 

connector for battery charging unit 3 858 490 

Ambient temperature: 

0 to 60 °C 

Summary of Contents for IGA 15 plus















Reviews: