IMPAC pyrometer IGA 15 plus
13
8.2
Software PortaWin
PortaWin
is a Windows based software which enlarges the functions of the pyrometer, the min.
requirement is Windows XP. To install the software, double-click the setup.exe file on the installa-
tion CD.
Starting the program will show the following icons with the corresponding functions:
Transfers the stored measured values of the pyrometer to the PC. following
data will be added to each temperature value:
•
date of measurement
•
time of measurement
•
adjusted
emissivity
•
minimum and maximum value of all measurements
Starts and stops the recording of temperature data and displays them in an
online diagram. The sequence of the recorded values is dependent on the
adjusted time interval.
Transferred stored data or online recorded data can be stored under a
certain file name and recalled at any time.
Recalled data can be displayed in a diagram or in table form and printed out
for further analysis.
The data files can be converted into text files (under
output ASCII file
save
as .txt file), and transferred into EXCEL.
Additionally to the measured values the date and time will be read out via
interface. Theses values can checked and adjusted on this position.
9
Special displays of the pyrometer
Display Description
Battery capacity low, only short operation time of the pyrometer,
automatically shut-down on too low capacity
7777
Measuring temperature below beginning of temperature range (250°C)
8888
Measuring temperature above end of temperature range (1800°C)
ERR2
Malfunction by strong HF-interferences
MAX 7777
Maximum value storage below beginning of temperature range (250°C)
MAX 8888
Maximum value storage above end of temperature range (1800°C)
MIN 7777
Minimum value storage below beginning of temperature range (250°C)
MIN 8888
Minimum value storage above end of temperature range (1800°C)
DIF 7777
Difference temp. measurement out of display range
DIF 8888
Difference temp. measurement out of display range
