07
Owner’s Manual & Safety Instructions
Inser
ti
ng Staples or Nails into the magazine
a)
Remove ba�ery pack from the tool.
b)
Press the release bu�on and pull out the magazine cover.
c)
Tilt the tool and place nails/staples into the track of the magazine
channel.
Make sure that the fasteners are placed correctly:
·
S
taples are placed against the profiled side of the
rail, the crown of the
staple
s
in the uppermost part of the magazine.
Nailing or Stapling
Hold handle firmly with magazine flat to work
piece forming a 90° Angle.
Two modes of firing: Single Firing and Contact
Firing
1)
Single Firing M
ode
Push the drive shi� (single/contact firing knob) to le� side, it is on Single
Firing mode . Single Firing is good for precision placement .
Step 1:
Push the drive shi� to le� side
Step 2:
Depress the safety contact pin against the work piece
Step 3:
Squeeze the trigger to fire the staple or nail ; Released the trigger
and safety contact pin a�er firing
Nail Gun
