SG900 03
GENERAL POWER TOOL SAFETY WARNINGS
6. Safety Instructions for Spray Gun
a)Do not use the product for spraying flammable
materials.
b) Be aware of any hazards presented by the
material being sprayed. Consult the markings
on the container or the information supplied by
the manufacturer of the material to be sprayed.
c) Do not spray any material where the hazard is
not known.
d) Use appropriate personal protective
equipment, such as dust mask, safety goggles,
protective gloves and ear protection.
e) Do not clean the product with flammable
solvents.
f) Never use highly flammable or corrosive
liquids. Only use paints and solvents with a flash-
point above 21°C. Ask a professional for advice.
g) Never point the product toward open flames!
h) Do not allow children to play with
theproduct. Never work near children or
animals.
i) Never manipulate the product and always use
the safety and/or protective guardson the
product to avoid risks.
j) Risk of injury: Do not direct the product
towards people or animals.
k) Never smoke during the paint process.
l) Always ensure sufficient circulation of fresh
air.
m) Never use paint containing lead.
n)Before any work (such as transport,
construction, conversion, cleaning or
maintenance) and when the product is not being
used, disconnect it from the power supply and
empty the paint container!
7. Emergency
Familiarise yourself with the use of this product
by means of this instruction manual. Memorise
the safety directions and follow them to the
letter. This will help to prevent risks and hazards.
1.Always be alert when using this product, so
that you can recognise andhandle risks early.
Fast
intervention can prevent serious injury and
damage to property.
2. Switch off and disconnect from the power
supply if there are malfunctions.
Have the tool
checked by a qualified professional and repaired,
ifnecessary, before you operate it again.
