Get to know your
PANEL
MINI
What’s in the box
CONGRATULATIONS ON YOUR NEW LED PANEL
FROM LUME CUBE!
Instruction Manual
5600K
100%
1.3h
5600K
100%
Battery Level Indicator
Brightness Display
Mode Indicator Icon
Battery Remaining Time
Color Temperature Display
1.3h
100%
5600K
100%
Low Temperature Warning
High Temperature Warning
Charging Icon
HOT
COLD
Interface Icon
PANEL
MINI
How To Use
1.
Turn on/off
Press and hold the BLUE power/mode button for 3 seconds to turn on the power or turn off the
power. LED lights up after power on.
2.
Button Controls
Once your PANEL MINI is on, tap the Blue power/mode button to toggle between Brightness &
Color Temperature controls. The Mode Indicator Icon on the left of the OLED Display Screen
will indicate what mode you are on.
Push the adjustment dial UP towards the (+) sign to increase the brightness or color
temperature value
Push the adjustment dial DOWN towards the (-) sign to decrease the brightness or color
temperature value
3.
Brightness Adjustability
Your Lume Cube PANEL MINI allows for full brightness adjustability to control the output of your
light. When on Brightness Mode, use your adjustment dial to increase or decrease brightness in
5% increments. The lowest you can go is 1% brightness, and the highest is 100% brightness. At
each brightness level, you'll see the Estimated Run Time in hours in the top left corner. Brightness
level is the primary adjustment that will change your Estimated Run Time.
4.
Color Temperature Adjustment
The Lume Cube PANEL MINI offers fully adjustable color temperature to ensure you can
capture the best content. When in Color Temperature Mode, you have the ability to adjust
between 3200K and 5600K in 100K increments. Use the adjustment dial to increase or
decrease your Color Temperature as needed.
PANEL MINI
Instruction Manual
Softening Diffuser
USB-C Charging Cable
OLED Display Screen
USB Type-C Charging Port
Adjustment Dial
Power /
Mode Button
1/4 Screw
1/4 Screw
