HT22IoT-09
User’s
Manual
22
FTP client program should work in passive mode, then the connection is
established fully by the client (the client chooses the data port). For file transfer with the
monitor it is possible to use maximum one connection at the same time, that is why the
maximum number of connections must be limited to "1” in the client program.
Fig. 18. View of FTP ports configuration window
5.6.4.1 Selection of FTP user
The monitor has two user accounts for the FTP server secured by individual
passwords:
•
user:
”admin”
, password: “
admin
” - access to files saving and reading
•
user: ”
user
”, password: ”
passftp
” - access to archive files reading only.
FTP user names can not be changed, however it is possible to change the
password for each user - it is recommended to change passwords for security reasons.
The password must contain a minimum of 4 characters. Password change is only possible
through the web page in "Ethernet” parameters group. Passwords can have a maximum of
8 characters. If the password is lost - making it impossible to use the FTP, the factory
defaults of the Ethernet interface must be restored through the Web site, or all settings can
be restored to the factory defaults using the "Reset" button
point 4.2
. All standard
parameters of the monitor including the Ethernet parameters and password for FTP server
users will be restored:
user ”
admin
” → password: ”
admin
” ;
user ”
user
” → password ”
passftp
”.
FileZilla can be used as the FTP client. By typing the monitor IP address in the address
field we can view and download archive files.
