EN
16
The appearance of the symbols mentioned below on the display means:
- Incorrectly introduced safety code.
- Overflow of the upper measuring range.
- Overflow of the lower measuring range.
One must move through the monitoring menu by means of
and
push-buttons. In this menu, all programmable meter parame-
ters are available only for readout. In this mode, the menu
Ser
is not
available. The exit from the monitoring menu is carried out by means of
the
push-button. In the monitoring menu, parameter symbols
are displayed alternately with their values.
The service algorithm of the meter is presented on the fig. 7.
