12
7.
Set of plugs
1 set
8.
CD with software and manuals
1 pc
9.
Power supply filter
1 pc
Guarantee card
1 pc
Note:
Before unpacking the memory card carry away electrostatic charges from
the body.
3.2. Installation in the Panel
Fig. 3.1.
Analyzer installation in the panel
Put the seal from standard accessories on the casing (see section 3.1). After
mounting the analyzer into the panel, the seal protects the part behind the panel
against the influence of risks appearing from the frontal part of the panel, resulting
from the IP65 protection grade. The analyzer is fixed to the panel by means of four
screwed mounting brackets from the standard accessory set (see section 3.1.).
Basic fixing and panel cut-out dimensions are presented on the above figure.
3.3. Analyzer Operating Conditions
The analyzer
can work at ambient temperature: 0...+50ºC (32 ...122ºF) and
max.75% of relative air humidity without condensation (or at 0...+65
ºC and max.
40% RH without condensation).
