EN
23
Wire
No.
Signal
Wire color in accordance to standard
EIA/TIA 568A
EIA/TIA 568B
1
TX+
white - green
white - orange
2
TX-
green
orange
3
RX+
white - orange
white - green
4
EPWR+
blue
blue
5
EPWR+
white - blue
white - blue
6
RX-
orange
green
7
EPWR-
white - brown
white - brown
8
EPWR-
brown
brown
Wire colors in a RJ-45 plug Table 2
After connection device to Ethernet network it is able to configure set
-
tings using HTTP protocol or Modbus TCP.
The data logger set include CD with USB driver and software
SM61Config, which is used to find devices in Ethernet network and con
-
figure them by Modbus RTU (USB) or Modbus TCP (Ethernet) protocol.
Notice:
To get full resistance of data logger on electromagnetic inter
ference one should follow these rules:
• do not supply the data logger from the network which is near
pulse noise generators (inverters) and do not use common
with them grounding circuits;
• use network filters;
• all shields should be grounded or connected to the protective
unit, one sided the nearest to the data logger;
• use the general rule, the wires leading different signals
should be carried out in the greatest distance from each
other (no less then 30 cm), the intersection of these
beams is performed at 90
o
.
Summary of Contents for SM61IoT
Page 17: ...17 pl...
Page 31: ...EN 31...